Oki B6100 Technical Manual page 267

Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Chute MBF Assy (RRP 4.1.1).
4. Remove the Shaft 14 (RRP 5.1.10).
5. Remove the Gear 14 (RRP 5.1.10).
6. Remove the P/H Assy (RRP 5.1.1).
7. Open upward the Chute Upper (PL5.1.6) together with Holder Toner Sensor (PL5.1.2) from the
P/H Assy (PL5.1.4).
8. Remove the Actuator Regi (RRP 5.1.4)
9. Unplug the connector (P/J432) from the Sensor Photo .
10. Disengage three hooks that secure the Sensor Photo , and remove the Sensor Photo from the
rear side of P/H Assy .
Replacement
1. Aligning the position exactly, secure the Sensor Photo to the P/H Assy (PL5.1.4) with three
hooks.
2. plug the connector (P/J432) in the Sensor Photo .
3. Mount the Actuator Regi (RRP 5.1.4).
4. Close down-ward the Chute Upper (PL5.1.6) together with Holder Toner Sensor (PL5.1.2) from
the P/H Assy .
5. Mount the P/H Assy (RRP 5.1.1)
6. Mount the Gear 14 (RRP 5.1.10).
7. Mount the Shaft 14 (RRP 5.1.10).
8. Mount the Chute MBF Assy (RRP 4.1.1).
9. Mount the Cover Front L/H (RRP 1.1.10).
10. Mount the Cover Assy Front (RRP 1.1.8).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
RRP 5.1.5 Sensor Photo:Regi (PL5.1.12) continued
Removal and Replacement Procedures (RRPs)
10-113