Oki B6100 Technical Manual page 226

Removal and Replacement Procedures (RRPs)
RRP 3.1.8 Clutch Assy Feed (PL3.1.37) continued
Replacement
1. Aligning the position exactly, insert the Clutch Assy Feed into the shaft of Feeder Assy
(PL3.1.19) in the Feeder .
2. Plug the connector (P/J65) to the PWBA Feeder .
3. Clamp the harness of Clutch Assy Feed to the Feeder.
4. Secure the Clutch Assy Feed to the shaft of Feeder Assy in the Feeder with the E-ring.
5. Aligning the position exactly, insert the Gear 2 (PL3.1.31) into the shaft of Feeder .
6. Aligning the position exactly, insert the Gear 3 (PL3.1.34) into the shaft of Feeder .
7. Align the Bracket (PL3.1.33) with its mount position to the Feeder .
8. Tighten the Bracket and the Cramp(PL 3.1.44) on the Feeder by a screw.
9. Secure the Bracket from the Feeder with three screws.
10. Mount the Feeder (RRP 3.1.10).
11. Mount the PWBA HKB PS (RRP 10.1.9).
12. Mount the Plate Handle (RRP 9.1.3).
13. Mount the Plate Assy Left (RRP 9.1.1).
14. Mount the Cover Right (RRP 1.1.7).
15. Mount the Cover Assy Top (RRP 1.1.4).
16. Mount the Cover Left (RRP 1.1.1).
17. Mount the Cover Assy I/F (RRP 1.1.2).
18. Mount the Chute MBF Assy (RRP 4.1.1).
19. Mount the Cover Front L/H (RRP 1.1.10).
20. Mount the Cover Assy Front (RRP 1.1.8).
10-72 OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0