Oki B6100 Technical Manual page 331

Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Cover Assy I/F (RRP 1.1.2).
4. Remove the Cover Left (RRP 1.1.1).
5. Remove the Plate Assy Left (RRP 9.1.1).
6. Remove the Plate Handle (RRP 9.1.3).
7. Remove the Housing Assy Size Sensor (RRP 9.1.7).
8. Remove the Size Sensor Housing (RRP 9.1.6).
9. Unplug the connector (P/J51) of Harness Assy Size M from the PWBA Size 1 (PL9.1.19).
10. Remove the two screws securing the Harness Assy Size M to the Housing Size Sensor
(PL9.1.21).
11. Draw off the harness of Harness Assy Size M from three holes in the Housing Size Sensor ,
and Remove the Harness Assy Size M .
Replacement
1. Insert the harness of Harness Assy Size M into three holes in the Housing Size Sensor
(PL9.1.21).
2. Align the Harness Assy Size M with its mount position to the Housing Size Sensor .
3. Secure the Harness Assy Size M to the Housing Size Sensor with two screws.
4. Plug the connector (P/J51) of Harness Assy Size M to the PWBA Size 1 .
5. Mount the Size Sensor Housing (RRP 9.1.6).
6. Mount the Housing Assy Size Sensor (RRP 9.1.7).
7. Mount the Plate Handle (RRP 9.1.3).
8. Mount the Plate Assy Left (RRP 9.1.1).
9. Mount the Cover Left (RRP 1.1.1).
10. Mount the Cover Assy I/F (RRP 1.1.2).
11. Mount the Cover Front L/H (RRP 1.1.10).
12. Mount the Cover Assy Front (RRP 1.1.8).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
RRP 9.1.5 Harness Assy Size M (PL9.1.20) continued
Removal and Replacement Procedures (RRPs)
10-177