Alignment; Envelope Feeder - Oki B6100 Technical Manual

Diagnostic Mode

1.5.7 Alignment

The Alignment Menu enables you to adjust the registration of the image to the paper. The image can
be adjusted from top to bottom (direction of paper travel) and from side to side (scan direction). You
can adjust each paper source separately.
Complete instructions for performing registration alignment are contained in section 9.
Test
Tray1 Feed Dir
Tray2 Feed Dir
Tray3 Feed Dir
Front Feed Dir
Env Feed Dir
Tray1 Scan Dir
Tray2 Scan Dir
Tray3 Scan Dir
Front Scan Dir
Env Scan Dir
8-12
Table 3. Alignment Menu
Component Adjusted
Tray 1 in the feed direction
Tray 2 in the feed direction
Tray 3 in the feed direction
MBF in the feed direction
Envelopes in the feed direction
Tray 1 in the scan direction
Tray 2 in the scan direction
Tray 3 in the scan direction
MBF in the scan direction
Envelopes in the scan direction
OKI B6100 Laser Printer - Base Engine Technical Manual
Notes
Adjusts the timing between the stock
being fed from tray one and the image
on the photoreceptor.
Adjusts the timing between the stock
being fed from tray two and the image
on the photoreceptor.
Adjusts the timing between the stock
being fed from tray three and the
image on the photoreceptor.
Adjusts the timing between the stock
being fed from the multisheet bypass
feeder and the image on the photore-
ceptor.
Adjusts the timing between the stock
being fed from the envelope feeder
and the image on the photoreceptor.
Adjusts the image start of scan position
on the photoreceptor to match the
stock being fed from tray one.
Adjusts the image start of scan position
on the photoreceptor to match the
stock being fed from tray two.
Adjusts the image start of scan position
on the photoreceptor to match the
stock being fed from tray three.
Adjusts the image start of scan position
on the photoreceptor to match the
stock being fed from the multisheet
bypass feeder.
Adjusts the image start of scan position
on the photoreceptor to match the
stock being fed from the envelope
feeder.
Version 1.0