Oki B6100 Technical Manual page 151

1.6 Adjustment Mode
1.6.1 Paper Size/Type Adjustment
There are many operator menus, configuration setups, settings, and functions that are accessible
through the Menu Mode. All of these are explained in the operator manual. This topic deals with one
area of the User Menu, setting the size and type of paper contained in each tray and feeder. The paper
size and type can be set for each paper tray, the multisheet bypass feeder, and the envelope
feeder.You must properly set each tray before you perform the registration adjustment.
1. From the Ready condition, press Menu.
2. With Paper Menu displayed, press Select.
3. Use the Next Button to scroll down the list until Media Size/Type is displayed.
4. Press the Select Button. Front Tray will be displayed (this is the Multisheet Bypass Feeder).
5. Press the Select Button. Media Size will be displayed. Press Select. You will have a choice of the
following sizes for the tray:
6. Use the Next Button to display your choice and press Select.
7. Press the Return Button to return to the Media Size/Type Menu.
8. Press the Next Button until Media type is displayed, then press Select. You will have a choice of
the following media types:*
9. Use the Next Button to display your choice and press Select.
10. Press the Return Button until Media Size/Type Menu is displayed.
11. Use the Next Button to display the next paper tray or feeder. Repeat steps 5 through 10 until all
trays have been set.
*If the tray displayed is the Envelope feeder, you will have the following choice for Media Size:
12. When completed, press return a number of times until Ready is displayed
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Letter B5
A5 A6
DL Envelope COM 10 Envelope
Executive Legal
A4
Plain
Letterhead
Bond
Postcard
COM 10 Envelope
C5 Envelope
Statement
C5 Envelope
Monarch Envelope
Folio
Transparency Prepunched
Colored preprinted
Label Card stock
Envelope Other
Monarch Envelope
DL Envelope
Adjustment Mode
9-3