Fusing; Cleaning - Oki B6100 Technical Manual

Hide thumbs Also See for B6100:

Table of Contents

Principles of Operation

6. Fusing

The paper moves to the Fuser Assy where it passes between the Heat Roll and the Pressure Roll. The

Heat Roll melts the toner image and bonds it permanently to the paper. The paper then is transported

to the output tray.

The Cleaning Blade removes any toner that remains on the drum after the transfer process. Immedi-

ately after passing the Cleaning Blade, the drum passes under the BCR. The BCR applies an AC volt-

age to the surface of the drum to neutralize any electrical patterns remaining from the last print cycle.

Figure 7. Side view block diagram of the fusing and cleaning processes

The toner that the Cleaning Blade removes is collected inside the CRU. Toner that is reclaimed from

the drum is not reused by the CRU.

Figure 8. Side view cutaway of the CRU

OKI B6100 Laser Printer - Base Engine Technical Manual

engine po008FA

Table of Contents