Oki B6100 Technical Manual page 239

Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Chute MBF Assy (RRP 4.1.1).
4. Remove the Spring MBF (RRP 4.1.9).
5. Remove the Gear Pick Up (RRP 4.1.10).
6. Remove the Roll Assy MBF (with3-6,28)(RRP 4.1.2).
7. Disengaging two hooks that secure the Tray Bottom Assy to the Chute MBF Assy , open the Tray
Bottom Assy toward the front.
8. Remove the Tray Bottom Pick Up . (RRP 4.1.12)
9. Unhook the right Bearing Exit (PL4.1.14) secured to the Tray Bottom Assy from the Chute MBF
Assy .
10. Unhook the left Bearing Exit secured to the Tray Bottom Assy from the Chute MBF Assy .
11. Remove the Tray Bottom Assy together with the left and right Bearing Exits from the Chute
MBF Assy .
12. Remove the Bearing Exits from the left and right shafts of Tray Bottom Assy .
Replacement
1. Mount the Bearing Exits on the left and right shafts of Tray Bottom Assy .
2. Aligning the position exactly, mount the Tray Bottom Assy together with the left and right
Bearing Exits on the bearing section of Chute MBF Assy .
3. Secure the left shaft of Tray Bottom Assy to the Chute MBF Assy with a hook of Bearing
Exit .
4. Secure the right shaft of Tray Bottom Assy to the Chute MBF Assy with a hook of Bearing
Exit .
5. Mount the Tray Bottom Pick Up (RRP 4.1.12).
6. Insert the Spring Tray Bottom MBF (PL4.1.13) into two studs of Tray Bottom Pick Up from the
Chute MBF Assy .
7. Deflecting the right hook of Chute MBF Assy , rotate the Tray Bottom Assy together with the
Tray Bottom Pick Up toward the rear.
8. Insert two shafts of Chute MBF Assy into two stud holes of Tray Bottom Pick Up to secure
the Tray Bottom Assy with left and right hooks of Chute MBF Assy .
9. Mount the Roll Assy MBF (with3-6,28)(RRP 4.1.2).
10. Mount the Gear Pick Up (RRP 4.1.10).
11. Mount the Spring MBF (RRP 4.1.9).
12. Mount the Chute MBF Assy (RRP 4.1.1).
13. Mount the Cover Front L/H (RRP 1.1.10).
14. Mount the Cover Assy Front (RRP 1.1.8).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
RRP 4.1.4 Tray Bottom Assy (PL4.1.8) continued
Removal and Replacement Procedures (RRPs)
10-85