Oki B6100 Technical Manual page 341
Base engine
Hide thumbs
Also See for B6100:
- User manual (210 pages) ,
- Installation manual (52 pages) ,
- Brochure & specs (6 pages)
Table of Contents
Advertisement
Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Cover Assy Rear (RRP 1.2.3).
4. Remove the Cover Assy I/F (RRP 1.1.2).
5. Remove the Cover Left (RRP 1.1.1).
6. Remove the Cover Assy Top (RRP 1.1.4).
7. Remove the Plate Assy Left (RRP 9.1.1).
8. Remove the Cover Interlock (RRP 9.1.18).
9. Remove the Chute Assy Exit (RRP 7.1.8).
10. Unplug the connector (P/J30) from the PWBA HKB26 MCU (PL10.1.13).
11. Unclamp the harness of Switch Assy I/L Rear from the printer.
In the following steps, do not detach the Switch Assy I/L Rear and the printer far
away because they are connected with the harness.
12. Remove the two screws securing the Switch Assy I/L Rear to the printer.
13. Detach the harness of Harness Assy OCT-M a little from the printer.
14. Draw the harness of Harness Assy OCT-M from the hole in the printer.
Replacement
1. Insert the harness of Switch Assy I/L Rear into the hole in the printer.
2. Align the Switch Assy I/L Rear with its mount position to the printer.
3. Secure the Switch Assy I/L Rear to the printer with two screws.
4. Plug the connector (P/J30) to the PWBA HKB26 MCU (PL10.1.13).
5. Clamp the harness of Switch Assy I/L Rear to the printer.
6. Mount the Chute Assy Exit (RRP 7.1.8).
7. Mount the Cover Interlock (RRP 9.1.18).
8. Mount the Plate Assy Left (RRP 9.1.1).
9. Mount the Cover Assy Top (RRP 1.1.4).
10. Mount the Cover Left (RRP 1.1.1).
11. Mount the Cover Assy I/F (RRP 1.1.2).
12. Mount the Cover Assy Rear (RRP 1.2.3).
13. Mount the Cover Front L/H (RRP 1.1.10).
14. Mount the Cover Assy Front (RRP 1.1.8).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
RRP 10.1.3 Switch Assy I/L Rear (PL10.1.7) continued
Removal and Replacement Procedures (RRPs)
10-187
Advertisement
Chapters
Table of Contents
