Oki B6100 Technical Manual page 209

Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Chute MBF Assy (RRP 4.1.1).
4. Remove the Cover Assy I/F (RRP 1.1.2).
5. Remove the Cover Left (RRP 1.1.1).
6. Remove the Cover Assy Top (RRP 1.1.4).
7. Remove the Cover Right (RRP 1.1.7).
8. Remove the Plate Assy Left (RRP 9.1.1).
9. Remove the Plate Handle (RRP 9.1.3).
10. Remove the PWBA HKB PS (RRP 10.1.9).
11. Remove the Feeder (RRP 3.1.10).
12. Unplug the connector (P/J641)on the Clutch Assy Turn (PL3.1.2) from the Feeder .
13. Remove the four screws securing the Roll Assy Turn (PL3.1.1) to the Feeder .
14. Remove the Roll Assy Turn together with Spring Extension (PL3.1.3) and Spring Chute
(PL3.1.4) from the Feeder .
15. Unhook the Spring Chute securing to the Roll Assy Turn at two places, and remove the Spring
Chute .
Replacement
1. Hook the Spring Chute to the boss of the right Chute of the Roll Assy Turn (PL3.1.1).
2. Hook the Spring Chute to the notch of the right bracket of the Roll Assy Turn .
3. Aligning the position exactly, mount the Roll Assy Turn together with Spring Extension
(PL3.1.3) and Spring Chute to the Feeder .
4. Secure the Roll Assy Turn to the Feeder with four screws.
5. Plug the connector (P/J641) to the Clutch Assy Turn (PL 3.1.12) from the Feeder .
6. Mount the PWBA HKB PS (RRP 10.1.9).
7. Mount the Feeder (RRP 3.1.10).
8. Mount the Plate Handle (RRP 9.1.3).
9. Mount the Plate Assy Left (RRP 9.1.1).
10. Mount the Cover Right (RRP 1.1.7).
11. Mount the Cover Assy Top (RRP 1.1.4).
12. Mount the Cover Left (RRP 1.1.1).
13. Mount the Cover Assy I/F (RRP 1.1.2).
14. Mount the Chute MBF Assy (RRP 4.1.1).
15. Mount the Cover Front L/H (RRP 1.1.10).
16. Mount the Cover Assy Front (RRP 1.1.8).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 3.1.2 Spring Chute (PL3.1.4) continued
10-55