Oki B6100 Technical Manual page 449

COMMAND
MEMORY WRITE
(3byte command)
START
SNR STATUS1 REQUEST
SNR STATUS1 REQUEST
SNR STATUS1 REQUEST
SNR STATUS1 REQUEST
SNR STATUS1 REQUEST
Table H-2. Command and status returns for the Controller and MCU
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
HEX. CONTENT
7F Writes a new value in
Non-volatile memory
85 Start Indication
86 Read out the state of
sensors
89 Read out the state of
sensors
8A Read out the state of
sensors
8C Read out the state of
sensors
8F Read out the state of
sensors
STATUS
CONTENT OF RETURN STATUS
RETURNED
STATUS 0 Printer state
STATUS 0 Printer state
STATUS 0 Printer state
STATUS 0 Printer state
SNR STATUS1 Paper path sensors
SNR STATUS2 Cover sensors
SNR STATUS3 No Paper senors
SNR STATUS4 Full stack/ Low paper sensors
SNR STATUS5 Toner/Units presense sensors
Principles of Operation
13-51