Oki B6100 Technical Manual page 206

Removal and Replacement Procedures (RRPs)
RRP 3.1.1 Roll Assy Turn (PL3.1.1) continued
Replacement
1. Hook the Spring Extension (PL3.1.3) to two notches on the right side of Roll Assy Turn to
secure the Spring Extension to the Roll Assy Turn .
2. Hook the Spring Extension (PL3.1.3) to two notches on the left side of Roll Assy Turn to
secure the Spring Extension to the Roll Assy Turn .
3. Mount the Spring Chute (RRP 3.1.2).
4. Align the Roll Assy Turn , together with the Spring Extension and Spring Chute , to the
Feeder .
5. Secure the Roll Assy Turn to the Feeder with four screws.
6. Plug the connector (P/J641) to the Clutch Assy Turn (PL3.1.12) from the Feeder .
7. Mount the Feeder (RRP 3.1.10).
8. Mount the PWBA HKB PS (RRP 10.1.9).
9. Mount the Plate Handle (RRP 9.1.3).
10. Mount the Plate Assy Left (RRP 9.1.1).
11. Mount the Cover Right (RRP 1.1.7).
12. Mount the Cover Assy Top (RRP 1.1.4).
13. Mount the Cover Left (RRP 1.1.1).
14. Mount the Cover Assy I/F (RRP 1.1.2).
15. Mount the Chute MBF Assy (RRP 4.1.1).
16. Mount the Cover Front L/H (RRP 1.1.10).
17. Mount the Cover Assy Front (RRP 1.1.8).
10-52 OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0