Oki B6100 Technical Manual page 181

Hide thumbs Also See for B6100:

Table of Contents

1. Remove the Cover Assy Front (RRP 1.1.8).

2. Remove the three screws securing the Cover L/H to the printer.

3. Disengage the upper left hook of Cover L/H , draw it a little toward the front from the

4. Remove the Cover L/H from the printer.

In the following steps, mount the Cover L/H while paying attention to the sections

overlapped with the Cover Assy Top and Cover Left .

1. Aligning the Cover L/H with its mount position to the printer.

2. Engage the hook of Cover L/H with a hole on the left side of Cover Assy Top to secure the

3. Secure the Cover L/H to the printer with three screws.

4. Mount the Cover Assy Front (RRP 1.1.8).

OKI B6100 Laser Printer - Base Engine Technical Manual

RRP 1.1.10 Cover Front L/H (PL1.1.19) continued

Removal and Replacement Procedures (RRPs)

Chapters

Table of Contents