Oki B6100 Technical Manual page 357

Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Cover Assy I/F (RRP 1.1.2).
4. Remove the Cover Left (RRP 1.1.1).
5. Remove the Cover Assy Top (RRP 1.1.4).
6. Remove the Plate Assy Left (RRP 9.1.1).
7. Remove the Plate Handle (RRP 9.1.3).
8. Unplug the connector (P/J11) from the PWBA HKB PS .
9. Unplug the connector (P/J285) from the PWBA HKB PS .
10. Unplug the connector (P/J283) from the PWBA HKB PS .
11. Unplug the connector (P/J281) from the PWBA HKB PS .
12. Unplug the connector (P/J284) from the PWBA HKB PS .
13. Unplug the connector (P/J281) from the PWBA HKB PS .
14. Remove the four screws securing the PWBA HKB PS to the printer.
In the following steps, do not detach Main Switch (PL10.1.18) and PWBA HKB PS far
away because they are connected with the harness.
15. Detach the PWBA HKB PS a little from the printer.
16. Connect the connector (P/J) of PWBA HKB PS to the Main Switch (PL10.1.8) on the printer.
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
RRP 10.1.9 PWBA HKB PS (PL10.1.17) continued
Removal and Replacement Procedures (RRPs)
10-203