Oki B6100 Technical Manual page 300

Removal and Replacement Procedures (RRPs)
RRP 7.1.4 Bearing MID (PL7.1.25) and Roll Assy MID-2(PL7.1.11) con-
tinued
Replacement
1. Insert the Bearing MID into the left and right shafts of Roll Assy MID-2 .
2. Mount the Roll Assy MID-2 together with the left and right Bearing MIDs on the Roll Assy
MID-2 to the Chute Assy Exit .
3. Secure the left and right shafts of Roll Assy MID-2 to the Chute Assy Exit with the hook of
Bearing MID .
4. Aligning the position exactly, insert the Gear Exit-32 (PL7.1.23) into the Chute Assy Exit .
5. Insert the Gear Exit-17 (PL7.1.5) into the shaft of Roll Assy MID-2 from the Chute Assy
Exit .
6. Hook the Gear Exit-17 to the shaft of Roll Assy MID-2 .
7. Insert the Gear Exit-17 into the shaft of upper Roll Assy MID-1 (PL7.1.7) from the Chute
Assy Exit .
8. Hook the Gear Exit-17 to the shaft of upper Roll Assy MID-1 .
9. Mount the Chute Assy Exit (RRP 7.1.8).
10. Mount the Eliminator Assy Exit (RRP 7.1.1).
11. Mount the Cover Interlock (RRP 9.1.18).
12. Mount the Plate Assy left (RRP 9.1.1).
13. Mount the Cover Assy Top (RRP 1.1.4).
14. Mount the Cover Left (RRP 1.1.1).
15. Mount the Cover Assy I/F (RRP 1.1.2).
16. Mount the Cover Assy Rear (RRP 1.2.3).
17. Mount the Cover Front L/H (RRP 1.1.10).
18. Mount the Cover Assy Front (RRP 1.1.8).
10-146 OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0