Oki B6100 Technical Manual page 216

Removal and Replacement Procedures (RRPs)
RRP 3.1.5 Feeder Assy (PL3.1.19) continued
Replacement
In the following steps, take care not to drop and lose the Spring Nudger (PL3.1.29).
1. Align the position exactly, mount the Spring Nudger (PL3.1.29) on the boss of Feeder .
In the following steps, align the Feeder Assy position so that the leading end of
Spring Nudger enters the boss of Feeder Assy.
2. Insert the lead edge of left shaft of Feeder Assy into the left bearing bore of Feeder , and
slide the Feeder Assy to the left.
3. Secure the left shaft of Feeder Assy to the Feeder with the Bearing (PL3.1.38).
4. Restore the reversed Feeder so that the top surface faces up.
5. Secure the left shaft of Feeder Assy to the Feeder with the E-ring.
6. Mount the Clutch Assy Feed (RRP 3.1.8).
7. Mount the Feeder (RRP 3.1.10).
8. Mount the PWBA HKB PS (RRP 10.1.9).
9. Mount the Plate Handle (RRP 9.1.3).
10. Mount the Plate Assy Left (RRP 9.1.1).
11. Mount the Cover Right (RRP 1.1.7).
12. Mount the Cover Assy Top (RRP 1.1.4).
13. Mount the Cover Left (RRP 1.1.1).
14. Mount the Cover Assy I/F (RRP 1.1.2).
15. Mount the Chute MBF Assy (RRP 4.1.1).
16. Mount the Cover Front L/H (RRP 1.1.10).
17. Mount the Cover Assy Front (RRP 1.1.8).
10-62 OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0