1.5 Diagnostic Mode
1.5.1 General Description of Diagnostic Mode
The Diagnostic Mode has the following functions:
•
Output Test
•
Input Test
•
Alignment
•
Maintenance Information
•
Operator Panel
•
Test Print
•
Flash Summary
•
Print Summary
1.5.2 Entering the D
1. Switch the printer power off.
2. Simultaneously press and hold the "Menu" and "Select" buttons.
3. Switch the printer power on.
4. When "Initializing" is displayed, release the "Menu" and "Select" buttons.
5. After a few seconds, Diagnostics will be displayed.
6. To exit Diagnostic Mode Menu and return to Ready, repeatability press Return or Cancel until
Ready is displayed.
1.5.3 Navigating through the Diagnostic Menus
Four buttons are used to navigate through the diagnostic menus, Next, Previous, Select, and
Return. From the initial menu selection "Output Tests" (see 1.5.1), pressing Next moves down the
menu to "Input Test" then to "alignment" and so on. Pressing Previous moves up through the menu.
With the desired menu displayed, pressing "Select" activates that menu. Pressing "Next" and
"Previous" moves down and up through the selected sub-menu. Pressing "Select" will activate the
displayed menu item. Pressing "Return" moves back to the next higher menu. See 1.5.4 for an
illustration of all the menus and sub-menus.
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Mode Menu
iagnostic
Diagnostic Mode
8-3