Oki B6100 Technical Manual page 235

Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Chute MBF Assy (RRP 4.1.1).
4. Remove the Spring MBF (RRP 4.1.9).
5. Remove the Gear Pick Up (RRP 4.1.10).
6. Unhook the right Cam Pick Up MBF (PL4.1.4) secured to the Shaft Assy MBF (PL4.1.3), and
shift the Cam Pick Up MBF to the left from the Chute MBF Assy .
7. Unhook the left Cam Pick Up MBF (left) (PL4.1.28) secured to the Shaft Assy MBF , and shift
the Cam Pick Up MBF (left) to the right from the Chute MBF Assy .
8. Aligning the boss of left shaft of Shaft Assy MBF with the left slit of Chute MBF Assy ,
move the Roll Assy MBF (with 3-6, 28) to the left, and remove the right shaft of Shaft Assy
MBF from the Bearing (PL4.1.7).
9. Raising the right shaft of Roll Assy MBF (with 3-6, 28), draw off the Roll Assy MBF (with
3-6, 28) toward the diagonal right while passing the boss of left shaft of Shaft Assy MBF
through the left slit of Chute MBF Assy .
Replacement
1. Insert the boss of left shaft of Shaft Assy MBF (PL4.1.3) into the left slit of Chute MBF
Assy (PL4.1.1).
2. Aligning the boss of left shaft of Shaft Assy MBF with the left slit of Chute MBF Assy ,
move the Roll Assy MBF (with 3-6) to the right, and insert the right shaft of Shaft Assy
MBF into the Baering (PL4.1.7).
3. Aligning the slit of left Cam Pick Up MBF (PL4.1.4) on the Shaft Assy MBF with the left
boss of Shaft Assy MBF , move the Cam Pick Up MBF to the left and secure it with a hook.
4. Aligning the slit of right Cam Pick Up MBF (PL4.1.4) on the Shaft Assy MBF with the right
boss of Shaft Assy MBF , move the Cam Pick Up MBF to the right and secure it with a hook.
5. Mount the Gear Pick Up (RRP 4.1.10).
6. Mount the Spring MBF (RRP 4.1.9).
7. Mount the Chute MBF Assy (RRP 4.1.1).
8. Mount the Cover Front L/H (RRP 1.1.10).
9. Mount the Cover Assy Front (RRP 1.1.8)
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
RRP 4.1.2 Roll Assy MBF(with 3-6,28) (PL4.1.2) continued
Removal and Replacement Procedures (RRPs)
10-81