Oki B6100 Technical Manual page 363

Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Chute MBF Assy (RRP 4.1.1).
4. Remove the Shaft 14 (RRP 5.1.10).
5. Remove the Gear 14 (RRP 5.1.10).
6. Remove the P/H Assy (RRP 5.1.1).
7. Remove the BTR Assy (RRP 6.1.1).
8. Remove the Chute Trans Assy (RRP 6.1.2).
9. Unplug the connector (P/J261) from the PWBA HVPS .
10. Unplug the connector (P/J262) from the PWBA HVPS .
11. Remove the one screw securing the PWBA HVPS together with Housing HVPS (PL10.1.21) to the
printer.
12. Remove the Housing HVPS together with Wire Assy DTS (PL6.1.10), Wire Assy TR (PL6.1.11) and
PWBA HVPS from the printer.
13. Unplug the connector (P/J DTS) of Wire Assy DTS from the PWBA HVPS , and remove the Wire
Assy DTS .
14. Unplug the connector (P/J TR) of Wire Assy TR from the PWBA HVPS , and remove the Wire Assy
TR .
15. Deflecting three hooks that secure the PWBA HVPS to the Housing HVPS , remove the PWBA HVPS
from the Housing HVPS .
Replacement
1. Deflecting three hooks of Housing HVPS (PL10.1.21), mount the PWBA HVPS on the Housing
HVPS .
2. Plug the connector (P/J TR) of Wire Assy TR (PL6.1.11) to the PWBA HVPS .
3. Plug the connector (P/J DTS) of Wire Assy DTS (PL6.1.10) to the PWBA HVPS .
4. Mount the Housing HVPS together with Wire Assy DTS , Wire Assy TR and PWBA HVPS to the
printer.
5. Secure the PWBA HVPS together with Housing HVPS to the printer with one screw.
6. Plug the connector (P/J262) to the PWBA HVPS .
7. Plug the connector (P/J261) to the PWBA HVPS .
8. Mount Chute Trans Assy (RRP 6.1.2).
9. Mount the BTR Assy (RRP 6.1.1).
10. Mount the P/H Assy (RRP 5.1.1).
11. Mount the Gear 14 (RRP 5.1.10).
12. Mount the Shaft 14 (RRP 5.1.10).
13. Mount Chute MBF Assy (RRP 4.1.1).
14. Mount the Cover Front L/H (RRP 1.1.10).
15. Mount the Cover Assy Front (RRP 1.1.8).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
RRP 10.1.11 PWBA HVPS (PL10.1.20) continued
Removal and Replacement Procedures (RRPs)
10-209