Oki B6100 Technical Manual page 213

RRP 3.1.4 Sensor Photo:Face Control,Low Paper (PL3.1.13) continued
Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Chute MBF Assy (RRP 4.1.1).
4. Remove the Cover Assy I/F (RRP 1.1.2).
5. Remove the Cover Left (RRP 1.1.1).
6. Remove the Cover Assy Top (RRP 1.1.4).
7. Remove the Cover Right (RRP 1.1.7).
8. Remove the Plate Assy Left (RRP 9.1.1).
9. Remove the Plate Handle (RRP 9.1.3).
10. Remove the PWBA HKB PS (RRP 10.1.9).
11. Remove the Feeder (RRP 3.1.10).
12. Unplug the connector (P/J662) on the left Sensor Photo: Face Control from the Feeder .
13. Disengage five hooks of left Sensor Photo: Face Control from the Feeder , and remove the
Sensor Photo: Face Control .
14. Unplug the connector (P/J661) on the right Sensor Photo:Low Paper from the Feeder .
15. Disengage five hooks of right Sensor Photo:Low Paper from the Feeder , and remove the Sensor
Photo:Low Paper .
Replacement
1. Secure the Sensor Photo:Low Paper to the mounting hole on the right side of Feeder with
five hooks.
2. Plug the connector (P/J611) to the right Sensor Photo:Low Paper from the Feeder .
3. Secure the Sensor Photo: Face Control to the mounting hole on the left side of Feeder with
five hooks.
4. Plug the connector (P/J662) to the left Sensor Photo: Face Control from the Feeder .
5. Mount the Feeder (RRP 3.1.10).
6. Mount the PWBA HKB PS (RRP 10.1.9).
7. Mount the Plate Handle (RRP 9.1.3).
8. Mount the Plate Assy Left (RRP 9.1.1).
9. Mount the Cover Right (RRP 1.1.7).
10. Mount the Cover Assy Top (RRP 1.1.4).
11. Mount the Cover Left (RRP 1.1.1).
12. Mount the Cover Assy I/F (RRP 1.1.2).
13. Mount the Chute MBF Assy (RRP 4.1.1).
14. Mount the Cover Front L/H (RRP 1.1.10).
15. Mount the Cover Assy Front (RRP 1.1.8).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Removal and Replacement Procedures (RRPs)
10-59