Oki B6100 Technical Manual page 169

Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Open the Cover Assy Rear .
4. Remove the Cover Option (RRP 1.1.3).
5. Remove the four screws securing the Cover Assy Top to the printer.
6. Raising a little the Cover Assy Top from the printer, unplug the connector (P/J362) on the
back side of Control Assy Panel (PL1.1.6).
7. Remove the Cover Assy Top from the printer.
8. Remove the Control Assy Panel (RRP 1.1.5).
Replacement
In the following steps, mount the Cover Assy Top while paying attention to the
sections overlapped with the Cover Left , Cover Assy I/F , and Cover Right .
1. Mount the Control Assy Panel (RRP 1.1.6) on the Cover Assy Top (RRP 1.1.5).
2. Plug the connector (P/J362) on the back side of Control Assy Panel from the Cover Assy Top .
3. Align the Cover Assy Top with its mount position on the printer.
4. Secure the Cover Assy Top to the printer with four screws.
5. Mount the Cover Option (RRP 1.1.3).
6. Close the Cover Assy Rear .
7. Mount the Cover Front L/H (RRP 1.1.10).
8. Mount the Cover Assy Front (RRP 1.1.8).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 1.1.4 Cover Assy Top (PL1.1.5) continued
10-15