Oki B6100 Technical Manual page 505

Category
Storage environment with a packed
CRU
Storage environment without a
packed CRU
Acoustic Noise
(submitted to ISO 7779)
Dust generated
CRU life
Toner Sensor (Factory Option)
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Normal condition:12 months maximum at 0~35°C
@ 15~80%RH with no condensation present
Severe condition: 1 month maximum at 20~0°C or 35~40°C
@ 5~15 or 80~95%RH with no condensation present
Normal condition: 12 months maximum at -20~50°C
@ 5~85%RH with no condensation present
Severe condition: 48 hours maximum at 50~60°C
@ 85~95%RH with no condensation present
Standby mode: TBD dB(A)
Sleep mode: Background noise only
Printing mode: 52.0dB(A) or TBD dB(A) with options
1
: Configuration is that Base Engine + Duplex Assy + Tray 2 +
Tray3+ ENV.Feeder+ OCT .
No more than 0.075mg/m
15,000 prints on A4 paper, with 5% print coverage
After Toner Sensor detects a low level of toner in the CRU, the
printer makes ten additional prints before generating an J5
error message. The MCU notifies the Controller by setting bit 2
of Status 15 (Zero Warning bit) to 1.
Printer Specifications
Specification
3
of dust
1
15-3