Oki B6100 Technical Manual page 255

RRP 4.1.12 Tray Bottom Pick Up (with9,10) (Reference Only) continued
Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Chute MBF Assy (RRP 4.1.1).
4. Remove the Spring MBF (RRP 4.1.9).
5. Remove the Gear Pick Up (RRP 4.1.10).
6. Remove the Roll Assy MBF (with3-6,28)(RRP 4.1.2).
7. Disengaging two hooks that secure the Tray Bottom Assy (PL4.1.14) to the Chute MBF Assy
(PL4.1.1), open the Tray Bottom Assy toward the front.
8. Rotate the Tray Bottom Pick Up by about 90 degrees toward the front from the Tray Bottom
Assy .
9. Remove the Tray Bottom Pick Up from the shaft of Tray Bottom Assy .
Replacement
1. Aligning the position exactly, mount the Tray Bottom Pick Up on the shaft of Tray Bottom
Assy (PL4.1.14) from the Chute MBF Assy (PL4.1.1).
2. Rotate the Tray Bottom Pick Up by about 90 degrees toward the rear from the Tray Bottom
Assy .
3. Insert the Spring Tray Bottom MBF (PL4.1.13) into two studs of Tray Bottom Pick Up from the
Chute MBF Assy .
4. Deflecting the right hook of Chute MBF Assy , rotate the Tray Bottom Assy together with the
Tray Bottom Pick Up toward the rear.
5. Insert two shafts of Chute MBF Assy into two stud holes of Tray Bottom Pick Up to secure
the Tray Bottom Assy with left and right hooks of Chute MBF Assy .
6. Mount the Roll Assy MBF (with3-6,28)(RRP 4.1.2).
7. Mount the Gear Pick Up (RRP 4.1.10).
8. Mount the Spring MBF (RRP 4.1.9).
9. Mount the Chute MBF Assy (RRP 4.1.1).
10. Mount the Cover Front L/H (RRP 1.1.10).
11. Mount the Cover Assy Front (RRP 1.1.8).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Removal and Replacement Procedures (RRPs)
10-101