Oki B6100 Technical Manual page 49

Tray 1 is out of paper.
Step
8
SENSOR PHOTO:FACE CONTROL PAPER (PL3.1.13)
ANALYSIS
1. Pull out the Cassette Assy.
2. Check the Sensor Photo: Face Control Paper using SEN-
SOR/SWITCH CHECK.
3. Shield and expose the sensing point of the Sensor Photo:
Face Control Paper by lifting up and down the Support Assy
Nudger (PL3.1.22) manually.
Does the Sensor Photo: Face Control Paper function cor-
rectly and increment the Sensor Check number on the
screen each time you actuate it?
9
FEEDER ASSY (PL3.1.19) ANALYSIS
1. Pull out the Cassette Assy.
2. Inspect the rotation of the Feeder Assy using MAIN MOTOR
TEST.
Does the Feeder Assy rotate normally?
10
CLUTCH ASSY FEED (PL3.1.37) ANALYSIS
Check the continuity between P/J651-4 and P/J651-1.
Is there the continuity between P/J651-4 and P/J651-1?
11
ROLL ASSY TURN (PL3.1.1)
Inspect the Spring Extension (PL3.1.3) and Rolls of the Roll
Assy Turn.
Do the Rolls contact properly respectively?
12
CLUTCH ASSY TURN (PL3.1.2) ANALYSIS
Check the continuity between P/J641-4 and P/J641-1.
Is there the continuity between P/J641-4 and P/J641-1?
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Actions and Questions
Primary FIPs:Error Codes
3.12 E2-1:MISFEED JAM continued
Yes
Go to step 9.
Go to step 11.
Go to step 11.
Go to step 12.
Replace the
PWBA Feeder
(PL3.1.2)
No
Replace the
Sensor
Photo:Face
Control Paper
(RRP3.1.4).
Go to step 10
Replace the
Clutch Assy
Feed
(RRP3.1.8).
Replace the
Roll Assy
Turn (PL3.1.1)
Replace the
Clutch Assy
Turn (PL3.1.2)
3-29