Oki B6100 Technical Manual page 299

RRP 7.1.4 Bearing MID (PL7.1.25) and Roll Assy MID-2(PL7.1.11) con-
Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Cover Assy Rear (RRP 1.2.3).
4. Remove the Cover Assy I/F (RRP 1.1.2).
5. Remove the Cover Left (RRP 1.1.1).
6. Remove the Cover Assy Top (RRP 1.1.4).
7. Remove the Plate Assy left (RRP 9.1.1).
8. Remove the Cover Interlock (RRP 9.1.18).
9. Remove the Eliminator Assy Exit (RRP 7.1.1)
10. Remove the Chute Assy Exit (RRP 7.1.8).
11. Unhook the Gear Exit-17 (PL7.1.5) secured to the upper Roll Assy MID-1 (PL7.1.7) from the
Chute Assy Exit .
12. Draw the Gear Exit-17 from the upper Roll Assy MID-1 .
13. Unhook the Gear Exit-17 secured to the Roll Assy MID-2 from the Chute Assy Exit .
14. Draw the Gear Exit-17 from the Roll Assy MID-2 .
15. Remove the Gear Exit-32 (PL7.1.23) from the Chute Assy Exit .
16. Unhook the Bearing MID that secures the left and right shafts of Roll Assy MID-2 from the
Chute Assy Exit .
17. Remove the Roll Assy MID-2 together with the left and right Bearing MIDs on the Roll Assy
MID-2 from the Chute Assy Exit .
18. Draw the left and right Bearing MIDs from the Roll Assy MID-2 .
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Removal and Replacement Procedures (RRPs)
tinued
10-145