Removal
1. Open the Cover Assy Rear from the printer.
2. Draw the right Cap Envelope secured to the Chute Assy Face Up (PL1.2.8) from the Cover Assy
Rear .
3. Draw the left Cap Envelope secured to the Chute Assy Face Up from the Cover Assy Rear .
Replacement
1. Mount the Cap Envelope on the right hole in the Chute Assy Face Up (PL1.2.8) of the Cover
Assy Rear .
2. Mount the Cap Envelope on the left hole in the Chute Assy Face Up of the Cover Assy Rear .
3. Close the Cover Assy Rear .
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 1.2.1 Cap Envelope (PL1.2.7) continued
10-29