Duplex - Oki B6100 Technical Manual

Primary FIPs:Error Codes
OKI B6100 Error Codes continued
Code
--
Message
J5
The CRU is nearing end of life and needs to be
replaced soon.
--
J5:LOW
TONER NEED
TO REPLACE
PLEASE
WAIT
J5 The CRU is nearing end of life and needs to be
replaced soon.
--
J5:LOW
TONER NEED
TO REPLACE
READY TO
PRINT
J3 The CRU is not installed or installed not in the
position.
--
EP
CARTRIDGE
NOT IN POSI-
TION
P1
The printer received a SET PAUSE command.
--
FUSER
PAUSE
The size of the paper loaded in the cassette is dif-
--
ferent than paper size that is stored in NVRAM.
PAPER SIZE
In Duplex mode: The size of the paper loaded in
ERROR
the cassette is not supported in Duplex Mode.
3-6
Cause
OKI B6100 Laser Printer - Base Engine Technical Manual
Results
-------------
How to Clear the Code
(If you cannot clear the code, go to the
appropriate error code FIP, or to the
option service manual)
Displays warning message.
-------------
Replace the CRU.
Displays warning message.
-------------
Replace the CRU.
Motor Assy Main, Laser Scanner, and
Fuser Assy controls stop immediately.
-------------
Reinstall the CRU, or install a new
CRU.
The ROS Motor and the Fuser Assy
controls stop after printing is com-
pleted.
-------------
Turn the Main Power OFF and ON.
The printer completes the current print
cycle.
-------------
Rewrite the NVRAM using ADJUST-
MENT MODE MENU.
Version 1.0