Oki B6100 Technical Manual page 211

Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Chute MBF Assy (RRP 4.1.1).
4. Remove the Cover Assy L/F (RRP 1.1.2).
5. Remove the Cover Left (RRP 1.1.1).
6. Remove the Cover Assy Top (RRP 1.1.4).
7. Remove the Cover Right (RRP 1.1.7).
8. Remove the Plate Assy Left (RRP 9.1.1).
9. Remove the Plate Handle (RRP 9.1.3).
10. Remove the PWBA HKB PS (RRP 10.1.9).
11. Remove the Feeder (RRP 3.1.10).
12. Unhook the left and right shafts of Actuator N/P from the left and right Support Actuators
(PL3.1.7), and remove the Actuator N/P from the Feeder .
Replacement
1. Aligning the position exactly, mount the Actuator N/P on the left and right Support
Actuators (PL3.1.7) of Feeder .
2. Insert the left and right shafts of Actuator N/P into the Support Actuator .
3. Mount the Feeder (RRP 3.1.10).
4. Mount the PWBA HKB PS (RRP 10.1.9).
5. Mount the Plate Handle (RRP 9.1.3).
6. Mount the Plate Assy Left (RRP 9.1.1).
7. Mount the Cover Right (RRP 1.1.7).
8. Mount the Cover Assy Top (RRP 1.1.4).
9. Mount the Cover Left (RRP 1.1.1).
10. Mount the Cover Assy I/F (RRP 1.1.2).
11. Mount the Chute MBF Assy (RRP 4.1.1).
12. Mount the Cover Front L/H (RRP 1.1.10).
13. Mount the Cover Assy Front (RRP 1.1.8).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 3.1.3 Actuator N/P (PL3.1.6) continued
10-57