Oki B6100 Technical Manual page 225

Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Chute MBF Assy (RRP 4.1.1).
4. Remove the Cover Assy I/F (RRP 1.1.2).
5. Remove the Cover Left (RRP 1.1.1).
6. Remove the Cover Assy Top (RRP 1.1.4).
7. Remove the Cover Right (RRP 1.1.7).
8. Remove the Plate Assy Left (RRP 9.1.1).
9. Remove the Plate Handle (RRP 9.1.3).
10. Remove the PWBA HKB PS (RRP 10.1.9).
11. Remove the Feeder (RRP 3.1.10).
12. Remove a screw fixing Cramp(PL 3.1.44) and Bracket(PL 3.1.33) from the Feeder.
13. Remove the three screws securing the Bracket from the Feeder .
14. Remove the Bracket from the Feeder .
15. Draw the Gear 3 (PL3.1.34) from the shaft of Feeder .
16. Draw the Gear 2 (PL3.1.31) from the shaft of Feeder .
17. Disengage the E-ring that secures the Clutch Assy Feed to the Feeder .
18. Unclamp the harness of Clutch Assy Feed from the Feeder .
19. Unplug the connector (P/J65) from the PWBA Feeder .
20. Draw the Clutch Assy Feed from the shaft of Feeder Assy (PL3.1.19) in the Feeder .
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
RRP 3.1.8 Clutch Assy Feed (PL3.1.37) continued
Removal and Replacement Procedures (RRPs)
10-71