Oki B6100 Technical Manual page 205

Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Chute MBF Assy (RRP 4.1.1).
4. Remove the Cover Assy L/F (RRP 1.1.2).
5. Remove the Cover Left (RRP 1.1.1).
6. Remove the Cover Assy Top (RRP 1.1.4).
7. Remove the Cover Right (RRP 1.1.7).
8. Remove the Plate Assy Left (RRP 9.1.1).
9. Remove the Plate Handle (RRP 9.1.3).
10. Remove the PWBA HKB PS (RRP 10.1.9).
11. Remove the Feeder (RRP 3.1.10).
12. Unplug the connector (P/J641)on the Clutch Assy Turn (PL3.1.2) from the Feeder .
13. Remove the four screws securing the Roll Assy Turn to the Feeder.
14. Remove the Roll Assy Turn together with Spring Extension (PL3.1.3) and Spring Chute
(PL3.1.4) from the Feeder.
15. Remove the Spring Chute (RRP 3.1.2).
16. Unhook the left Spring Extension from two notches of Roll Assy Turn , and remove the Spring
Extension .
17. Unhook the right Spring Extension from two notches of Roll Assy Turn , and remove the Spring
Extension .
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 3.1.1 Roll Assy Turn (PL3.1.1) continued
10-51