Oki B6100 Technical Manual page 215

Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Chute MBF Assy (RRP 4.1.1).
4. Remove the Cover Assy I/F (RRP 1.1.2).
5. Remove the Cover Left (RRP 1.1.1).
6. Remove the Cover Assy Top (RRP 1.1.4).
7. Remove the Cover Right (RRP 1.1.7).
8. Remove the Plate Assy Left (RRP 9.1.1).
9. Remove the Plate Handle (RRP 9.1.3).
10. Remove the PWBA HKB PS (RRP 10.1.9).
11. Remove the Feeder (RRP 3.1.10).
12. Remove the Clutch Assy Feed (RRP 3.1.8)
13. Remove the Sensor Photo:Face Control (RRP 3.1.4).
14. Disengage the E-ring that secures the left shaft of Feeder Assy to the Feeder .
In the following steps, place thick paper under the Feeder to protect the Roll of Roll
Assy Turn (PL3.1.1) from damage.
In the following steps, take care not to drop and lose the Spring Nudger (PL3.1.29).
15. Reverse the Feeder so that the top surface faces down.
16. Draw the Bearing (PL3.1.38) securing the left shaft of Feeder Assy to the Feeder .
17. Sliding the Feeder Assy to the right, draw the shaft of Feeder Assy from the left bearing
bore of the Feeder , and remove the Feeder Assy from the Feeder .
18. Remove the Spring Nudger (PL3.1.29) from the boss of Feeder .
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 3.1.5 Feeder Assy (PL3.1.19) continued
10-61