Oki B6100 Technical Manual page 281

Removal
In the following steps, do not touch the roll surface of BTR Assy and the Detack
Saw of Chute Trans Assy (PL6.1.3).
In removing the BTR Assy from the printer, take care not to damage the roll of BTR
Assy .
After removing the BTR Assy , cover it with A3/Ledger size paper and store it at a
safety place.
1. Open the Cover Assy Front (PL1.1.6) from the printer.
2. Push to unlock the left and right latches of BTR Chute Assy (PL6.1.1) that secure the BTR
Assy from the printer.
3. Holding the left and right knobs of BTR Assy , remove the BTR Assy from the BTR Chute Assy .
Replacement
In replacing the BTR Assy with a new one, peel off the stripping paper that
protects the roll of BTR Assy before mounting.
In the following steps, do not touch the roll surface of BTR Assy and the Detack
Saw of Chute Trans Assy (PL6.1.3).
In removing the BTR Assy from the printer, take care not to damage the roll of BTR
Assy .
1. Holding the left and right knobs of BTR Assy , engage the left and right shafts of BTR Assy
with the left and right latches of BTR Chute Assy (PL6.1.1) in the printer.
2. Pushing the left and right latches of BTR Chute Assy , secure the BTR Assy .
3. Mount the Chute MBF Assy (RRP 4.1.1).
4. Mount the Cover Assy Front (RRP 1.1.6).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 6.1.1 BTR Assy (PL6.1.2) continued
10-127