Oki B6100 Technical Manual page 187

RRP 1.2.3 Cover Assy Rear(Standard) (Reference Only) continued
Removal
In the following steps, take care not to drop and then damage the Cover Assy Rear .
1. Open the Cover Assy Rear from the printer.
2. Draw the lead edge of Stopper (PL1.2.10) secured to the Cover Assy Rear off the hole in the
Cover Assy Rear .
3. Pull upward to unlock the Stopper Pivot R (PL1.2.9) that secures the left Cover Assy Rear
to the printer.
4. Sliding the Cover Assy Rear to the left, release the bearing bores of Cover Assy Rear from
the left and right bosses of printer and remove it from the printer.
Replacement
In the following steps, take care not to drop and then damage the Cover Assy Rear .
1. Align the left and right bearing bores of Cover Assy Rear with the left and right bosses on
the rear side of the printer.
2. Sliding the Cover Assy Rear to the right, mount it on the printer.
3. Secure the left side of Cover Assy Rear to the printer with the Stopper Pivot R (PL1.2.9).
4. Insert the lead edge of Stopper (PL1.2.10) into a hole in the Cover Assy Rear .
5. Close the Cover Assy Rear .
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Removal and Replacement Procedures (RRPs)
10-33