Chute Trans & Paper (Pl6) - Oki B6100 Technical Manual

Principles of Operation
6- Chute Trans & Paper (PL6)
BTR Assy
(Bias Transfer Roll)
BTR Chute Assy
Figure 27Components of the Chute Trans & Fuser (1/2) BTR Chute Assy
13-30
Transfers the toner image from the drum to the sheet of paper.
The BTR applies a positive charge to the back of the sheet of paper as it
travels between the BTR and the surface of the drum. The positive charge
attracts the negative charged toner image on the drum, and the image
transfers to the paper.
Uses the Detack Saw to strip the sheet of paper from the surface of the
drum. The Saw electrically neutralizes the paper so it will easily peel away
from the drum. This assy then transfers the paper into the Fuser Assy
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0