Oki B6100 Technical Manual page 321

RRP 8.1.5 Sensor Assy CRU(with2,5,6) (Reference Only) continued
Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Cover Assy Rear (RRP 1.2.3).
4. Remove the Cover Assy I/F (RRP 1.1.2).
5. Remove the Cover Left (RRP 1.1.1).
6. Remove the Cover Assy Top (RRP 1.1.4).
7. Remove the Plate Assy Left (RRP 9.1.1).
8. Remove the CRU Top Guide Assy (RRP 8.1.1)
9. Release the harness of Sensor Assy CRU from three clamps of CRU Top Guide Assy (PL8.1.4).
10. Deflecting the right bracket of CRU Top Guide Assy with a small screwdriver, draw off the
right shaft of Sensor Assy CRU .
11. Draw the left shaft of Sensor Assy CRU from the hole in the left bracket of CRU Top Guide
Assy .
Replacement
1. Insert the left shaft of Sensor Assy CRU into a hole in the left bracket of CRU Top Guide
Assy (PL8.1.4).
2. Deflecting the right bracket of CRU Top Guide Assy with a small screwdriver, insert the
right shaft of Sensor Assy CRU into a hole in the right bracket of CRU Top Guide Assy .
3. Secure the harness of Sensor Assy CRU with three clamps of CRU Top Guide Assy .
4. Mount the CRU Top Guide Assy (RRP 8.1.1)
5. Mount the Plate Assy Left (RRP 9.1.1).
6. Mount the Cover Assy Top (RRP 1.1.4).
7. Mount the Cover Left (RRP 1.1.1).
8. Mount the Cover Assy I/F (RRP 1.1.2).
9. Mount the Cover Assy Rear (RRP 1.2.3).
10. Mount the Cover Front L/H (RRP 1.1.10).
11. Mount the Cover Assy Front (RRP 1.1.8).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Removal and Replacement Procedures (RRPs)
10-167