Oki B6100 Technical Manual page 339

Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Cover Assy I/F (RRP 1.1.2).
4. Remove the Cover Left (RRP 1.1.1).
5. Remove the Plate Assy Left (RRP 9.1.1).
6. Remove the Cover Interlock (RRP 9.1.18).
7. Remove the Chute Assy Exit (RRP 7.1.8).
8. Unplug the connector (P/J35) from the PWBA HKB26 MCU (PL10.1.13).
9. Unclamp the harness of Harness Assy OCT-M from the printer
In the following steps, do not detach the Harness Assy OCT-M and the printer far
away because they are connected with the harness.
10. Remove the two screws securing the Harness Assy OCT-M to the printer.
11. Detach the harness of Harness Assy OCT-M a little from the printer.
12. Draw the harness of Harness Assy OCT-M from the hole in the printer.
Replacement
1. Insert the harness of Harness Assy OCT-M into the hole in the printer.
2. Align the Harness Assy OCT-M with its mount position to the printer.
3. Secure the Harness Assy OCT-M to the printer with two screws.
4. Plug the connector (P/J35) to the PWBA HKB26 MCU (PL10.1.13).
5. Clamp the harness of Harness Assy OCT-M to the printer.
6. Mount the Chute Assy Exit (RRP 7.1.8).
7. Mount the Cover Interlock (RRP 9.1.18).
8. Mount the Plate Assy Left (RRP 9.1.1).
9. Mount the Cover Left (RRP 1.1.1).
10. Mount the Cover Assy I/F (RRP 1.1.2).
11. Mount the Cover Front L/H (RRP 1.1.10).
12. Mount the Cover Assy Front (RRP 1.1.8).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
RRP 10.1.2 Harness Assy OCT-M (PL10.1.4) continued
Removal and Replacement Procedures (RRPs)
10-185