Oki B6100 Technical Manual page 333

RRP 9.1.6 Size Sensor Housing(with14-18)(Reference Only)continued
Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Cover Assy I/F (RRP 1.1.2).
4. Remove the Cover Left (RRP 1.1.1).
5. Remove the Plate Assy Left (RRP 9.1.1).
6. Remove the Plate Handle (RRP 9.1.3).
7. Remove the Housing Assy Size Sensor (RRP 9.1.7).
8. Remove four screws securing the Size Sensor Housing to the Housing Assy Size Sensor
(PL9.1.X).
9. Disengage two hooks of Size Sensor Housing from the Housing Assy Size Sensor .
10. Remove the Size Sensor Housing from the Housing Assy Size Sensor .
Replacement
1. Disengage the back of Cam SW (PL9.1.15) on Size Sensor Housing from a square hole, and
while holding the back of Cam SW , mount the Size Sensor Housing on the Housing Assy Size
Sensor (PL9.1.X).
2. Secure the Size Sensor Housing to the Housing Assy Size Sensor with two hooks.
3. Secure Size Sensor Housing to the Housing Assy Size Sensor with four screws.
4. Mount the Housing Assy Size Sensor (RRP 9.1.7).
5. Mount the Plate Handle (RRP 9.1.3).
6. Mount the Plate Assy Left (RRP 9.1.1).
7. Mount the Cover Left (RRP 1.1.1).
8. Mount the Cover Assy I/F (RRP 1.1.2).
9. Mount the Cover Front L/H (RRP 1.1.10).
10. Mount the Cover Assy Front (RRP 1.1.8).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Removal and Replacement Procedures (RRPs)
10-179