Oki B6100 Technical Manual page 427

5- P/H Assy (PL5)
Sensor Photo:Regi
Toner Sensor
Retard Assembly
Clutch Regi
Roll Regi Metal
Roll Regi Rubber
Figure 26. Components of the P/H Assy
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Detects when a sheet of paper arrives at the Inlet and Chute Bottom
Upper.The Sensor Photo:Regi is part of the components that are used to
register the paper with the image on the drum.
Magnetic sensor that monitors the level of toner remaining in the CRU.
Prevents the MBF Roll Assembly from feeding more than one sheet of
paper at a time.
Consists of the gear and the magnetic clutch and located on the end of
the Roll Regi Rubber. When the Clutch Assy Regi is actuated, the drive
power is transmitted to the Roll Regi Rubber.
The rotation of these Rolls is controlled by the Clutch Regi, and deter-
mines the register position of the paper with the image on the Drum.
Principles of Operation
13-29