Removal and Replacement Procedures (RRPs)
RRP 5.1.2 Roll Regi Rubber (PL5.1.7) continued
Replacement
1. Insert the left shaft of Roll Regi Rubber into the left bearing bore of P/H Assy (PL5.1.1).
2. Insert the right shaft of Roll Regi Rubber into the right bearing of P/H Assy .
3. Insert the right shaft of Roll Regi Rubber into the left bearing bore of P/H Assy .
4. Secure the Roll Regi Rubber to the P/H Assy with the Bearing Rubber L (PL5.1.18).
5. Secure the Roll Regi Rubber to the P/H Assy with the Bearing Rubber R (PL5.1.17).
6. Insert the right shaft of Roll Regi Metal (PL5.1.5) together with Chute Upper Assy
(PL5.1.6) and Chute Inlet (PL5.1.8) into the left bearing bore of P/H Assy .
7. Insert the right shaft of Roll Regi Metal into the right bearing of P/H Assy .
8. Closing the Chute Upper Assy and Chute Inlet from the P/H Assy , engage the boss of Bearing
Metal (PL5.1.13) with the left slit, and secure the Roll Regi Metal with the Bearing Metal .
9. Closing the Chute Upper Assy and Chute Inlet from the P/H Assy , engage the boss of Bearing
Metal R (PL5.1.31) with the right slit, and secure the Roll Regi Metal with the B earing
Metal R .
10. Moving the Spring Torsion (PL5.1.29) to the right from P/H Assy , insert it into the Bearing
Metal R while avoiding the boss of Bearing Metal R .
11. From the P/H Assy , hook the Spring Torsion to the notch of Chute Upper Assy .
12. Secure the left shaft of Roll Regi Metal to the P/H Assy with the E-ring.
13. Mount the Clutch Regi (RRP 5.1.9).
14. Mount the Gear Regi Rubber (RRP 5.1.8).
15. Mount the Gear Regi Metal (RRP 5.1.7).
16. Mount the Spring Regi L (RRP 5.1.6).
17. Mount the P/H Assy (RRP 5.1.1.).
18. Mount the Gear 14 (RRP 5.1.10).
19. Mount the Shaft 14 (RRP 5.1.10).
20. Mount the Chute MBF Assy (RRP 4.1.1).
21. Mount the Cover Front L/H (RRP 1.1.10).
22. Mount the Cover Assy Front (RRP 1.1.8).
10-106
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0