Oki B6100 Technical Manual page 37

Step
10
ACTUATOR FULL STACK (PL7.1.2) ANALYSIS
Fill the Exit Tray with paper.
Does the paper lift the Actuator Full Stack, and does the
Actuator expose the photo-sensing point of the Sensor
Photo:Exit (PL7.1.16)?
11
SWITCH ASSY I/L REAR (PL10.1.7) ANALYSIS
Use SENSOR/ SWITCH CHECK to check the function of the
Switch Assy I/L Rear.
Open and close the Cover Rear (PL1.2.5).
Does the Switch Assy I/L Rear function correctly and
increment the Sensor Check number on the screen each
time you actuate it?
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Actions and Questions
Primary FIPs:Error Codes
3.7 E4-2:Exit JAM continued
Yes
Go to step 11.
Replace the
PWBA HKB26
MCU
(RRP10.1.7).
No
Replace the
Actuator Full
Stack
(RRP7.1.2) or
replace the
Sensor
Photo:Exit
(RRP7.1.5).
Replace the
Cover Rear
(PL1.2.5).
3-17