Oki B6100 Technical Manual page 490

Wiring Diagrams and Interconnections
The following table shows the signal names for the PWBA HKB26 MCU <=> Sensor Photo:Exit, and
Switch Assy I/L Rear path:
Signal Name
/FSTK Signal from the Sensor Photo: Full Stack. This signal is Low when the Sensor Photo:Full Stack is
activated.
24V EXIT MOT Signal from the Switch Assy I/L Rear. Goes Low when the Cover Rear is open and breaks the
24VDC circuit for the Motor Assy Exit.
The following table shows pin numbers, and voltage levels for the PWBA HKB26 MCU <=> Fuser
Assy path:
P30 P301
3
2
14-16
DB5 PWBA HKB26 MCU <=> Sensor Photo:Exit, and Switch Assy I/L Rear
Signal Name
1 /FSTK
- 24V EXIT MOT
Description
Signal Direction
E: Sensor Photo:Exit,
Switch Assy I/L Rear,
M: MCU
E => M
E => M
OKI B6100 Laser Printer - Base Engine Technical Manual
HIGH LOW
Trigger
Level Level
Level 3.3V 0V
Level 24V 0V
Version 1.0