Oki B6100 Technical Manual page 173

Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Open the Cover Assy Rear .
4. Remove the Cover Assy Top (RRP 1.1.4).
5. Remove the Cover Assy Panel (PL1.1.5).
6. Unplug the connector (P/J363) of Harness Assy Panel from the Control Assy Panel (PL1.1.6),
and remove the Harness Assy Panel .
Replacement
In the following steps, mount the Harness Assy Panel while paying attention to the
sections overlapped with the Cover Assy Top .
1. Plug the connector (P/J363) of Harness Assy Panel to the Control Assy Panel (PL1.1.6), and
mount the Harness Assy Panel .
2. Mount the Control Assy Panel (PL1.1.5).
3. Mount the Cover Assy Top (RRP 1.1.4).
4. Close the Cover Assy Rear .
5. Mount the Cover Front L/H (RRP 1.1.10).
6. Mount the Cover Assy Front (RRP 1.1.8).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
RRP 1.1.6 Harness Assy Panel (PL1.1.7) continued
Removal and Replacement Procedures (RRPs)
10-19