Oki B6100 Technical Manual page 171

Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Open the Cover Assy Rear .
4. Remove the Cover Assy Top (RRP 1.1.4).
5. Remove the four screws securing the Control Assy Panel to the Cover Assy Top (PL1.1.5).
6. Remove the Control Assy Panel from the Cover Assy Top .
Replacement
In the following steps, mount the Control Assy Panel while paying attention to the
sections overlapped with the Cover Assy Top .
1. Align the Control Assy Panel with its mount position on the Cover Assy Top .
2. Secure the Control Assy Panel to the Cover Assy Top (PL1.1.5) with four screws.
3. Mount the Cover Assy Top (RRP 1.1.4).
4. Close the Cover Assy Rear .
5. Mount the Cover Front L/H (RRP 1.1.10).
6. Mount the Cover Assy Front (RRP 1.1.8).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
RRP 1.1.5 Control Assy Panel (PL1.1.6) continued
Removal and Replacement Procedures (RRPs)
10-17