Oki B6100 Technical Manual page 296

Removal and Replacement Procedures (RRPs)
RRP 7.1.3 Bearing Exit (PL7.1.6) ,Bearing MID (PL7.1.25) and Roll Assy
Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Cover Assy Rear (RRP 1.2.3).
4. Remove the Cover Assy I/F (RRP 1.1.2).
5. Remove the Cover Left (RRP 1.1.1).
6. Remove the Cover Assy Top (RRP 1.1.4).
7. Remove the Plate Assy left (RRP 9.1.1).
8. Remove the Cover Interlock (RRP 9.1.18).
9. Remove the Eliminator Assy Exit (RRP 7.1.1)
10. Remove the Chute Assy Exit (RRP 7.1.8).
11. Unhook the Gear Exit-17 (PL7.1.5) secured to the upper Roll Assy MID-1 from the Chute Assy
Exit .
12. Draw the Gear Exit-17 from the upper Roll Assy MID-1 .
13. Unhook the Gear Exit-17 secured to the Roll Assy MID-2 (PL7.1.11) from the Chute Assy Exit .
14. Draw the Gear Exit-17 from the Roll Assy MID-2 .
15. Remove the Gear Exit-32 (PL7.1.23) from the Chute Assy Exit .
16. Unhook the Bearing Exit that secures the left and right shafts of upper Roll Assy MID-1
from the Chute Assy Exit .
17. Remove the upper Roll Assy MID-1 together with the left and right Bearing Exits on the Roll
Assy MID-1 from the Chute Assy Exit .
18. Draw the left and right Bearing Exits from the Roll Assy MID-1 .
19. Unhook the Gear Exit-17 secured to the lower Roll Assy MID-1 from the Chute Assy Exit .
20. Draw the Gear Exit-17 from the lower Roll Assy MID-1 .
21. Unhook the Bearing MID that secures the left and right shafts of lower Roll Assy MID-1 from
the Chute Assy Exit .
22. Remove the lower Roll Assy MID-1 together with the left and right Bearing MIDs on the Roll
Assy MID-1 from the Chute Assy Exit .
23. Draw the left and right Bearing MIDs from the Roll Assy MID-1 .
10-142
MID-1(PL7.1.7) continued
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0