Oki B6100 Technical Manual page 507

First Print Output Time (FPOT)
The First Print Output Time is the time from when the printer receives a START signal in the READY state,
until a single page is printed and delivered into the output tray, under the scanning condition (ROS Motor
ON).
Paper Size
Note:
1.The data are the theoretical values when the paper is fed from tray 1.
2. When ROS Motor OFF, the values are adjusted as follows:
3. When the paper is fed from other tray, the values are adjusted as follows:
4. The values for FPOT from the Sleep Mode are to be added 65 to each value.
Continuous Printing Speed After The First Sheet Out
Legal 13" SEF
Legal 14" SEF
Executive SEF
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Simplex Mode t (sec)
Letter SEF
A4 SEF
Duplex Upper Value:1 sht.Batch Mode
Duplex Lower Value:2 sht.Batch Mode
FPOT= t + 4.0 (600 dpi)
FPOT = t+ 4.0 (1200 dpi)
FPOT = t - 1.2 (from MBF)
FPOT = t + 1.2 (from tray 2)
FPOT = t + 2.4 (from tray 3)
Paper Type
(prints per minute)
Letter SEF
A4 SEF
B5 (JIS) SEF
Duplex Mode t (sec)
7.5
7.6
Simplex Mode
(impressions per minute)
26.2
21.5
21.5
TBD
24.9
26.2
Printer Specifications
13.8
14.6
14.0
15.4
Duplex Mode
19.2
16.3
15.9
14
18.1
19.8
15-5