Oki B6100 Technical Manual page 199

Removal
1. Draw the Cassette Assy (PL2.1.1) from the printer.
In the following steps, take care not to drop and miss the Spring Motor
(PL2.2.19).
2. Remove the two screws securing the Holder L (PL2.2.21) to the Cassette Assy .
3. Remove the Spring Motor (PL2.2.19) with Holder L from the Cassette Assy .
4. Remove the two screws securing the Holder R (PL2.2.20) to the Cassette Assy .
5. Remove the Spring Motor with Holder R from the Cassette Assy .
6. Unplug the connector (P/J673) of the Motor Assy from the Connector (PL2.2.25) of Cassette
Assy .
7. Remove the three screws securing the Motor Assy to the Cassette Assy .
8. Remove the Motor Assy from the Cassette Assy .
Replacement
1. Engaging the groove at a rotational part of Motor Assy with the boss of Shaft Assy Tongue
(PL2.2.12), mount the Motor Assy on the Cassette Assy (PL2.1.1).
2. Secure the Motor Assy to the Cassette Assy with three screws.
3. Plug the connector (P/J673) of the Motor Assy from the Connector (PL2.2.25) of Cassette
Assy .
In the following steps, take care not to drop and miss the Spring Motor
(PL2.2.19).
Holder R (PL2.2.20) with Spring Motor (PL2.2.19) to the replacement position of
4. Adjust the
the Cassette Assy .
5. Fix the Holder R to the Cassette Assy (two screws).
6. Adjust the
Cassette Assy .
7. Fix the Holder L to the Cassette Assy (two screws).
8. Mount the Cassette Assy to the printer (RRP 2.1.1).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
RRP 2.2.4 Motor Assy (PL2.2.22) continued
Holder L (PL2.2.21) with Spring Motor to the replacement position of the
Removal and Replacement Procedures (RRPs)
10-45