Oki B6100 Technical Manual page 311

Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Cover Assy Rear (RRP 1.2.3).
4. Remove the Cover Assy I/F (RRP 1.1.2).
5. Remove the Cover Left (RRP 1.1.1).
6. Remove the Cover Assy Top (RRP 1.1.4).
7. Remove the Plate Assy left (RRP 9.1.1).
8. Unplug the connector (P/J25) from the PWBA HKB26 MCU (PL 10.1.13).
9. Remove the two screw securing the CRU Top Guide Assy to the printer.
10. Remove the CRU Top Guide Assy together with Sensor Assy CRU (PL8.1.6) from the printer.
11. Remove the Sensor Assy CRU (RRP 8.1.5).
Replacement
1. Mount the Sensor Assy CRU (RRP 8.1.5).
2. Plug the connector (P/J25) to the PWBA HKB26 MCU (PL 10.1.13).
3. Align the CRU Top Guide Assy with its mount position together with Sensor Assy CRU
(PL8.1.6) to the printer.
4. Secure the CRU Top Guide Assy to the printer with two screws.
5. Mount the Plate Assy left (RRP 9.1.1).
6. Mount the Cover Assy Top (RRP 1.1.4).
7. Mount the Cover Left (RRP 1.1.1).
8. Mount the Cover Assy I/F (RRP 1.1.2).
9. Mount the Cover Assy Rear (RRP 1.2.3).
10. Mount the Cover Front L/H (RRP 1.1.10).
11. Mount the Cover Assy Front (RRP 1.1.8).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
RRP 8.1.1 CRU Top Guide Assy (PL9.1.1) continued
Removal and Replacement Procedures (RRPs)
10-157