Oki B6100 Technical Manual page 257

Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Chute MBF Assy (RRP 4.1.1).
4. Remove the Shaft 14 (RRP 5.1.10).
5. Remove the Gear 14 (RRP 5.1.10).
6. Unplug the connector (P/J42) in the P/H Assy .
7. Unplug the connector (P/J43) in the P/H Assy .
8. Release two clamps on the harness of P/H Assy .
9. Remove the five screws securing the P/H Assy to the printer.
10. Raising a little the right end of P/H Assy to shift to the right, remove the P/H Assy
upward from the printer.
Replacement
1. Insert the P/H Assy from diagonal right into the printer, and align the position.
2. Secure the P/H Assy to the printer with five screws.
3. Secure the harness of P/H Assy with two clamps.
4. Plug the connector (P/J42) in the P/H Assy .
5. Plug the connector (P/J43) in the P/H Assy .
6. Mount the Gear 14 (RRP 5.1.10).
7. Mount the Shaft 14 (RRP 5.1.10).
8. Mount the Chute MBF Assy (RRP 4.1.1).
9. Mount the Cover Front L/H (RRP 1.1.10).
10. Mount the Cover Assy Front (RRP 1.1.8).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 5.1.1 P/H Assy (PL5.1.4) continued
10-103