Oki B6100 Technical Manual page 179

Removal
1. Open the Cover Assy Front (PL1.1.9).
2. Remove the Cover Assy Front (RRP 1.1.8).
3. Disengage the Clip (PL1.1.22) that secures the Stopper Tray (PL1.1.16) to the Tray Assy MBF .
In the following steps, do not detach Cover Assy Front and Tray Assy MBF far away
because they are linked with the Stopper Tray (PL 1.1.16).
4. Face the Cover Assy Front toward the rear, insert a small screwdriver into a gap at the
front right end between Cover Assy Front and Tray Assy MBF to deflect the right side of
Cover Assy Front , and disengage the boss.
5. Insert a small screwdriver into a gap at the front left end between Cover Assy Front and
Tray Assy MBF to deflect the left side of Cover Assy Front , and disengage the boss, then
detach the Tray Assy MBF .
6. Aligning the boss of Tray Assy MBF with a slit of Stopper Tray , remove the Tray Assy MBF
from the Cover Assy Front .
Replacement
1. Aligning the boss of Tray Assy MBF with a slit of Stopper Tray (PL1.1.16), mount the Tray
Assy MBF .
In the following steps, do not detach Cover Assy Front and Tray Assy MBF far away
because they are linked with the Stopper Tray .
2. Face the Cover Assy Front toward the rear, insert the left boss of Tray Assy MBF into the
left hole in the Cover Assy Front .
3. Insert a small screwdriver into a gap at the front right end between Cover Assy Front and
Tray Assy MBF to deflect the right side of Cover Assy Front , and engage the boss at the
front right end of Tray Assy MBF .
4. Secure the Stopper Tray to the shaft of Tray Assy MBF with the Clip (PL1.1.22).
5. Mount the Cover Assy Front (RRP 1.1.8).
6. Close the Cover Assy Front (PL1.1.9).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 1.1.9 Tray Assy MBF (PL1.1.17) continued
10-25