Oki B6100 Technical Manual page 293

Removal
1. Remove the Cover Assy Front (RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the Cover Assy Rear (RRP 1.2.3).
4. Remove the Cover Assy Top (RRP 1.1.4).
In the following steps, take care not to damage the Actuator Full Stack (PL7.1.2).
5. Remove the Eliminator Assy Exit (RRP 7.1.1).
6. Raise the left shaft of Actuator Full Stack to remove from the left bearing of Chute Assy
Exit in the printer.
7. Draw the right shaft of Actuator Full Stack from the right bearing of Chute Assy Exit , and
remove the Actuator Full Stack .
Replacement
In the following steps, take care not to damage the Actuator Full Stack .
1. Insert the right shaft of Actuator Full Stack into the right bearing of Chute Assy Exit .
2. Insert the left shaft of Actuator Full Stack into the left bearing of Chute Assy Exit .
3. Mount the Eliminator Assy Exit (RRP 7.1.1)
4. Mount the Cover Assy Top (RRP 1.1.4).
5. Mount the Cover Assy Rear (RRP 1.2.3).
6. Mount the Cover Front L/H (RRP 1.1.10).
7. Mount the Cover Assy Front (RRP 1.1.8).
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
RRP 7.1.2 Actuator Full Stack (PL7.1.2) continued
Removal and Replacement Procedures (RRPs)
10-139