Parts List; Notations In The Rrp Text - Oki B6100 Technical Manual

Removal and Replacement Procedures (RRPs)
Section 10 - Removal and Replacement Procedures continued

Notations in the RRP text

･ The printer orientation expressed in the procedure is defined as follows.
･ RRP X.Y.Z "AAAAA" at the top of procedure implies that the part name to be removed/replaced
is"AAAAA".
･ "(PLX.Y.Z)" following part name in the procedure implies that this part corresponds to the
plate (PL) "X.Y", item "Z" in Section 12 Parts List. Therefore, the shape and mounting
position of the parts can be confirmed in Section 12 Parts List.
･ "(PPR X.Y.Z.)" in the text or at the end of text in the procedure implies that reference
work procedure is given in "PPR X.Y.Z".
･ The screws in the illustration imply that they should be loosened and removed using a
cross-tip screw-driver, unless otherwise specified.
･ A black arrow in the illustration implies that the part should be moved in the arrow
direction, and when numbers are assigned to black arrows, the parts should be moved in the
order of given numbers.
･ For the location of connectors (P/J), refer to [Section 11 P/J Location].
10-6
Figure 1. Definition of Printer Orientation
OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0